- Rack Mountable Enclosure
- Rack Unit Height (1.7")
- Dimensions: 27" (D) x 19" (W) x 1.7" (H)
- Metal thickness: 1.2 mm
- 1U Chassis Mounting Rails and Kit (is included)
- Supermicro® Super X6DHP-3G2 Serverboard
|
- Dual 604-pin FC-mPGA4 Sockets
- Supports up to two Intel® 64-bit Xeon™ processor(s) of the same type below:
- Xeon Dual Core (Paxville) CPU with 2x2MB L2 Integrated Advanced Transfer Cache
- Xeon (Nocona) CPU with 1MB L2 Integrated Advanced Transfer Cache, up to 3.60 GHz
- Xeon (Irwindale) CPU with 2MB L2 Integrated Advanced Transfer Cache, up to 3.60 GHz
- Xeon LV (Low Voltage) CPU up to 2.8 GHz
- Intel® E7520 chipset, 800MHz FSB
|
- 8Mb Flash EEPROM with Phoenix® BIOS
|
- Eight 240-pin DIMM sockets
- Supports up to 16 GB DDRII 400MHz memory
- Dual-channel memory bus
- Memory must be populated in pairs
- DDRII 400MHz buffered (registered) ECC SDRAM
|
- ICH5R Controller, Host RAID 0, 1, JBOD support
- Support for Zero-Channel Hardware RAID with Supermicro ZCR Card (Optional)
- SAS: Adaptec AIC9410: Adaptec 8-port SAS Controller
- RAID 0, 1, 10, JBOD support
- Chassis support up to four hard drives
- Support for IPMI v.2.0 (Optional IPMI Card)
- 3rd LAN(GbE) port (Optional: IPMI-LAN) *Must be used with Optional IPMI Card above
|
- 4 x 1" SAS/SATA Hot-swap drive bays
- HD1-HD4 Bays: Hot-swap SAS/SATA Hard Drive
- Up to 2 Terabyte of storage can be supported
|
- PS/2 Keyboard
- PS/2 Mouse
- 1 x Floppy
- 2 x USB 2.0 rear ports
- 1 x USB 2.0 internal headers
- 2 x Fast UART 16550 serial ports
- 1 x VGA port
- 2 x RJ45
|
- ATI Rage XL SVGA PCI video controller
- 8MB of video memory
| |
|
- Intel 82546GB Dual Port Gigabit Controller
- Supports RJ45 output
|
- CPU/System Fan Speed
- CPU Temperature
- System Voltage Vcore,+3.3V,+5V,+12V
|
- 1 x Universal (SXB-E) slot for :
- 1 x8 PCI-E Slot OR 1 x 64-bit PCI-X 100MHz slot
- 1 x Universal (SXB-E) slot for:
- 1 x8 PCI-E Slot OR 1x 64-bit PCI-X 100MHz slot
- 1 x IPMI 2.0 Slot (For optional 3rd LAN)
- Supports Full-length add-on cards
|
- Between Watts to Watts with the standard configuration
- Noise level (during normal operation): ~dBA (ISO 7779 operator position 0.6 meter)
|
- 700W Hot-swap Redundant Power Supply with I2C for Remote Management
- 100 - 240V, 60-50Hz, 10-5 Amp
- Tested to comply with FCC Standards
- Certifications: UL, TUV, CE, CSA
|
- TEAC 3.5" 1.44MB Slim Floppy Drive
|
- Panasonic Slim DVD-ROM drive
|
- 1U Chassis Mounting Rails and Kit (is included)
|
- Redhat Linux AS 2.1
- Redhat 9.0
- Redhat Fedora Linux Core 1,2
- Windows XP PRO +
- Windows 2003,2000 Server /Web server
- FreeBSD 5.2.1
- SuSE 9.0, 9.1x32
- and more ...
|
- 1 year Parts & Labor Standard
- Extended Warranties Available
| |
